Changing The Password - Epson ActionNote 4SLC2-50 User Manual

Changing the Password

If you enable the Password Checking option on the
ADVANCED CMOS SETUP screen, you use the CHANGE
PASSWORD option to specify the password.
Caution
If you do set a password, be sure it is easy to remember, If you
forget your password, you will have to call the Epson
Connection for assistance.
When you select the
following prompt:
Enter CURRENT Password:
Type the current password. (When you enable a password for the
first time, the current password is AMI.) You see the following
prompt
Enter NEW password:
Type your password using up to six characters. To protect your
password, the screen does not display what you type. After typing
the password, press
Re-Enter NEW Password:
Type the same password again and press
your password for the system.) The program displays the
following message
N E W
Press to return to the main menu screen. Highlight WRITE TO
E
SC
CMOS AND EXIT
Running Setup
5 - 1 2
CHANGE PASSWORD option, you see the
Enter.
P a s s w o r d I n s t a l l e d
and press
Then you see the following prompt:
Enter.
Enter.
(This confirms