Atlas Copco PTS 800 T3 Cud Instruction Manual page 132

NOTES
Note 1:
Connector: Deutsch DT04-6P
Terminals: Deutsch 0460-215-16141
Sec. lock: Deutsch W6P
Counter plug:
Connector: Deutsch DT06-6S
Wedge: W6S
Use 6 plugs for all unused cavities
Note 2:
Connector: Deutsch DT04-4P
Terminals: Deutsch 0460-204-12141
Sec. lock: Deutsch W4P
Note 3:
Wire insulation should be resistant to oil, fuel and
coolant.
Note 4:
All terminals may be replaced by an equivalent part
with the same functionality.
Contact engineering department before making any
changes.
Note 5:
Wires to be held together by a 200mm nylon spiral.
Note 6:
Marking to be printed on each end of all wires.
Note 7:
Wire harness shall be provided with a marking label
with Atlas Copco part number and edition.
Note 8:
Label indicating Atlas Copco part number. and
edition, testing and/or production date, supplier
reference. Black text on white background.
Note 9:
Wire harness finishing; black braiding, unless stated
otherwise.
Note 10:
Use shrinkable sleeve to isolate terminal 10, 11, 12.
- 132 -