Atlas Copco PTS 800 T3 Cud Instruction Manual page 51

Following condition is taken into account, before the
COOLDOWN SEQUENCE
COOLDOWN TIMER ≥ COOLDOWN TIME°
During the COOLDOWN SEQUENCE, if the
COOLDOWN 'MODE' is set to 'timer and
temperature based' the following view is shown:
MAIN VIEW
ENGINE COOLING DOWN
0s
1s
400°C
401°C
40%
1286h 1200RPM
During the COOLDOWN SEQUENCE, if the
can be ended: COOLDOWN 'MODE' is set to 'timer based', or if
the temperature condition has been met, the following
view is shown:
MAIN VIEW
ENGINE COOLING DOWN
180s
480°C
3.3 bar
0s 180s
74s
40%
1286h 1200RPM 6.0 bar
- 51 -
After cooling down, the engine enters the STOP
SEQUENCE. During the STOP SEQUENCE, before
the ENGINE RPM is being re-read, the following
view is shown:
MAIN VIEW
ENGINE STOPPING
40%
1286h 508RPM
Active Buttons:
Start Button
(to initiate Start command)
Measurement View Button
Settings View Button
Alarms View Button
5.3 bar