Table of Contents
Advertisement
Click
to draw filter object. See Figure 5-74.
Select the blue line and then use mouse to adjust zone size.
Note
Each rule can set two sizes (min size/max size). Once the object is smaller than the min size or larger
than the max size, there is no alarm. Please make sure the max size is larger than the min size.
Click Ok to complete the rule setup.
For detailed setups, please refer to chapter 5.10.3.1.1 motion detect for detailed information.
5.10.3.2.1.2
From main menu->Setup->Event-> Behavior analytics->Behavior analytics, click
type as intrusion, you can see the following interface. See Figure 4-126.
Note:
System supports customized area shape and amount.
Support enter/leave/both detection.
Can detect the moving object operation in the specified zone, customized trigger amount and staying
time.
Support objects filter function.
Figure 5-74
Intrusion (Cross warning zone)
, and then select rule
381
Advertisement
Table of Contents
