Table of Contents
Advertisement
Select direction, and then input customized rule name.
Preset: Select a preset you want to use behavior analytics.
Name: Input customized rule name.
Direction (A→B/B→A/A↔B): System can generate an alarm once there is any object crossing in the
specified direction.
Target filter: Click
Once the object is smaller than the min size or larger than the max size, there is no alarm. Please
make sure the max size is larger than the min size.
Now you can draw a rule. Left click mouse to draw a warning zone. Right click mouse to complete the
setup.
Tips
Click
to delete the corresponding rule.
Click
, you can refer to chapter 4.7.3.1 to set other parameters.
Click Apply to complete the setup.
4.7.3.3 Abandoned Object Detect (Optional)
System generates an alarm when there is abandoned object in the specified zone.
From main menu->Setting->Event->Behavior analytics, select the type as abandoned object, the object
interface is shown as below. See Figure 4-128.
Figure 4-127
, you can set filter object size. Each rule can set two sizes (min size/max size).
240
Advertisement
Table of Contents
