Dahua DHI-NVR5224-24P-4KS2 User Manual page 164

Step 2 Set parameters

Channel: It is the device channel number. If you have not added the network camera, the
channel number is shown as .

Status: Red circle (
current channel has video.

IP address: It is to display network camera IP address.

Type: There are two connection types. You can use the network to connect to the camera or
use the WIFI. The
means current network camera mode is hotspot.

Add/Delete: Click
Step 3 Add network camera.

Device search: Click the button; you can search all network cameras in the same network
segment. See Figure 4-25. Double click a camera or check the camera box and then click
Add button, you can add a device to the list.
Note
The device in the added device list is not shown in the search result column.
Figure 4-24
) means current channel has no video, green circle (
means current network camera connection mode is general; the
to delete the device, click to add the device to the NVR.
) means
152