Dahua DHI-NVR5224-24P-4KS2 User Manual page 193

Note

Different series products may display different navigation bar icons. Refer to the actual product
for detailed information.

Go to the Main menu->Setting->System->General to enable navigation bar function; otherwise
you cannot see the following interface.
4.3.2.1 Main Menu
Click button
4.3.2.2 Dual-screen operation
Important
This function is for some series only.
Click to select screen 2, you can view an interface shown as below. See Figure 4-60. It is a
navigation bar for screen 2.
Click any screen split mode; HDMI2 screen can display corresponding screens. Now you can control two
screens. See Figure 4-61.
Note

Screen 2 function is null if tour is in process. Please disable tour function first,

Right now, the screen 2 operation can only be realized on the navigation bard. The operations on the
right-click menu are for screen 1 only.
4.3.2.3 Output Screen
Figure 4-58
Figure 4-59
to go to the main menu interface.
Figure 4-60
Figure 4-61
181