Table of Contents
Advertisement
Please follow the steps listed below.
Step 1
Click Next button.
Enter P2P interface. See Figure 4-17.
Note
From main menu->Setting->Network->P2P, you can go to P2P interface.
Step 2
Check the box to enable P2P function.
Step 3
Click Next button to complete setup.
The status is online if the P2P registration is successful.
Client Operation
Please follow the steps listed below.
Step 1
Use the cell phone to scan the QR code on the interface and then download and install the cell
phone app.
Step 2
Open App; tap
Step 3
Tap
at the top left corner, you can see the main menu.
Step 4
Tap Device manager button, you can use several modes (P2P/DDNS/IP and etc.) to add the
device. Click
the connected device. See Figure 4-18.
Figure 4-17
to go to the Live preview.
to save current setup. Tap Start Live preview to view all-channel video from
146
Advertisement
Table of Contents
