Table of Contents
Advertisement
RADIANQBIO INSTRUMENT
4. Front panel
⑴ RI-10W, RI-20W, RI-25W, RI-27W, RI-30W, RI-50W
① comparison output Indication LED: The LED lights up when the Relay is in contact
output state.
② HOLD Indication LED: This LED will be lighted when the measured value is on Hold.
③ MOD
④ Measured value Indication: It indicates the measured value and each setting value.
⑤
Measruing Mode
measuring value will be Zero (0) and the Analog output will be 0V (4mA) as well.
SET-UP Mode
⑥
Measuring Mode
SET-UP Mode
⑦
Measuring Mode
SET-UP Mode
⑧
Measuring Mode
SET-UP Mode
※ Measuring Mode : The state in which the current measurement is being displayed
※ SET-UP Mode: State of entering function menu with key operation
: Measured value stable (on), unstable (off) indication
: Once this Key is pressed for more than 1 second, the current
: Once this is pressed on the Function Mode, you will return to the
measuring mode.
: Once this Key is pressed, the lower limit setting value will be
displayed and this value also can be changed.
: The location of row for the number flickering can be moved.
: Once this Key is pressed, the upper limit setting value will be
displayed and the value can be changed.
: The flickering number will be increased by 1 and 1.
: Once this Key is pressed, HOLD will be selected and once this
key is pressed again, HOLD will be cancelled.
: Save each set-up value.
6
www.radian21.com
Advertisement
Table of Contents
