Digital Calibration (Calibration By Sensor Output Value) - Radian RI-10W User Manual

RADIANQBIO INSTRUMENT

8-4. Digital calibration (Calibration by sensor output value)

1) RI-10W, RI-27W, RI-50W, RI-148A,B
At the time of purchasing sensor, the rated capacity (R.C) and rated output (R.O)
declared on the calibration sheet can be used for the calibration for easier calibration.
If you do not know the output value of the sensor or if you need to correct the error
after calibration by the output value of the sensor, refer to 8-4 Actual Load Calibration.
Measuring Mode
key is being
While
pressed, press
※ Zero position will change after setup is complete.
※
Measuring Mode
key.
Displays Function
Displays Sensor Output Calibration State
Displays Rated Output value Input State
Input the rated output value by using
key. And then, press
Displays the rated capacity value Input State
Input the rated capacity value by using
key. And then press
Calibration Completed.
: The state in which the current measurement is being displayed
Mode
key.
key.
31
www.radian21.com
and
and