Components & Function; How To Use Hold Mode - Radian RI-10W User Manual

RADIANQBIO INSTRUMENT
7. Components & Function

7-1. How to use Hold mode

Hold mode is largely divided into Peak Hold and Sample Hold. Please select Peak or
Sample. To input Hold, you can use Hold key on the front panel or external input. For
the operation method, please refer to the drawing below.
1) Peak Hold
Peak hold mode : It is to hold and display the maximum value of (+) direction.
Absolute peak hold mode : It is to hold and display the maximum value of the
absolute value (+/-).
2) Sample hold
among the measured values.
① − : sensor input value
② − : Display value &
analog output value
Front panel HOLD LED
External HOLD input termanal
Front panel HOLD Key
: To Hold the maxium value among the measured values.
: It is to hold and display the value at the time of Hold signal input
②
On
Off
On
Off
On
off
<Peak HOLD>
①
time
14
www.radian21.com
①
②
time
<Sample HOLD>