Table of Contents
Advertisement
RADIANQBIO INSTRUMENT
F-51. Force unit (Conversion unit set up)
Display data
0
1
2
3
4
Note1) When setting the conversion unit (set value: 1 to 4), calibration modes of 8-3
and 8-4 are not available.
After calibrating in kgf (set value:0), set the force unit as desired.
Note2) If F-51 is set to MPa (set value:4), the F-00 Decimal point setting cannot be
changed.
F-52. Key disabling (Front key locking set up)
Display data
0
0
0
0
kgf
N
kgf × 9.8
ℓb
kgf × 2.2
-
-
Setting
Hold key Lock (1), Release (0)
Hi key Lock (1), Release (0)
Lo key Lock (1), Release (0)
Zero key Lock (1), Release (0)
<Set-up example>
1001 : Zero & Hold key Lock, Hi and Lo key Release
Setting
-
-
-
Bar
-
MPa
(Standard setup value: 0000)
30
www.radian21.com
(Standard setup value : 0)
kg/㎠
-
-
kg/㎠ × 0.98
kg/㎠ × 0.098
Advertisement
Table of Contents
