Radian RI-10W User Manual page 10

RADIANQBIO INSTRUMENT
○ RY2 : RELAY2 (Upper Limit) Output Terminal
17
○ RY3 : RELAY3( Normal) Output Terminal (OK )
18
○ RY4 : RELAY 4 Output Terminal
19
○ SW1, 2 :
20
• RI-10W, RI-25W, RI-27W, RI-30W, RI-50W : NC
• RI-20W :
Sensor supply voltage setting
DC10V
SW1 OFF
SW2
※ When use Potentiometer (Model LPS,LPM) : SW1 and SW2 OFF
○ FG : Frame ground terminal
21
⑵ RI-148A, RI-148B
Please check the location of terminal and its use. While the projected button is being
pressed, please insert the cable into the lower hole completely. As soon as you release
the button, the connection will be completed. At the point, please slightly pull the calbe
and check whether the cable is come off or not.
(The most suitable calbe is Φ 0.5~1. Linking cable must be brazing or used with 1
terminal)
① 24V : DC24V (Main Power)
② EXC+ : Sensor Supply Voltage + Connection Terminal
③ EXC- : Sensor Supply Voltage + Connection Terminal
DC24V
ON
- OFF
9
Sensor output signal setting
0 ~ 10V
-
ON
www.radian21.com
4 ~ 20mA