Electrical Requirements - Gas Dryer - Maytag MLE24PDAYW Installation Instructions Manual

Product Dimensions
Top dryer
exhaust
Top dryer
gas line
9 ⁄ "
1
4
Gas
(235 mm)
18 ⁄ "
41 /2" 1
1
8
(460 mm)
(1054 mm)
37"
(940 mm)
5 ⁄ "
1
2
(140 mm)
Bottom
NOTE: Gas lines
dryer
located 1 ⁄ "
1
gas line
4
(32 mm) inward
from adjacent
side.
5" (127 mm)
Door
23 ⁄ "
3
4
(603 mm)
6
(343 mm)
Electric
41 ⁄ "
1
2
(1054 mm)
3 ⁄
1
4
(83 mm)
Bottom
Back View
dryer
exhaust
29" (737 mm)
27" (686 mm)
76 ⁄ "
3
8
(1940 mm)
10 ⁄ "
1
4
(260 mm)
approx. 1"
(25 mm)
Side View
Electrical Requirements – Gas Dryer
13 ⁄ "
1
2
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
IMPORTANT: The dryer must be electrically grounded in
accordance with local codes and ordinances or, in the absence
of local codes, with the National Electrical Code, ANSI/NFPA 70,
"
latest edition.
If codes permit and a separate ground wire is used, it is
recommended that a qualified electrical installer determine that
the ground path is adequate.
A copy of the above code standards can be obtained from:
One Batterymarch Park, Quincy, MA 02269
n A 120 volt, 60 Hz, AC only, 15-amp, fused electrical circuit
is required. A time-delay fuse or circuit breaker is also
recommended. It is recommended that a separate circuit
serving only this dryer be provided.
Recommended Ground Method
The dryer, when installed, must be electrically grounded in
accordance with local codes or, in the absence of local codes,
with the National Electrical Code, ANSI/NFPA 70, latest edition.
For a grounded, cord-connected dryer:
I
This dryer must be grounded. In the event of a malfunction or
breakdown, grounding will reduce the risk of electric shock
by providing a path of least resistance for electric current.
This dryer is equipped with a cord having an equipment-
grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and
ordinances.
WARNING:
grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service representative or
personnel if you are in doubt as to whether the dryer is
properly grounded. Do not modify the plug provided with the
dryer: if it will not fit the outlet, have a proper outlet installed
by a qualified electrician.
WARNING
Electrical Shock Hazard
National Fire Protection Association
GROUNDING INSTRUCTIONS
Improper connection of the equipment-
SAVE THESE INSTRUCTIONS