Connector Defi Nitions - Supero SUPERSERVER 6027R-TDARF User Manual

5-8 Connector Defi nitions
Power Connectors
A 24-pin main power supply connector
(JPW1), two 8-pin CPU power con-
nectors (JPW2/3) and one 4-pin power
connectors (JPW5) are located on the
serverboard. These power connectors
meet the SSI EPS 12V specification
and must be connected to your power
supply to provide adequate power to the
system. See the table on the right for pin
defi nitions.
8-Pin Power Connectors
In addition to the ATX main power, two
8-pin 12V power connector located at
JPW2 and JPW3 are also required con-
nections. See the table on the right for
pin defi nitions.
NMI Button
The non-maskable interrupt button head-
er is located on pins 19 and 20 of JF1.
Refer to the table on the right for pin
defi nitions.
Power LED
The Power LED connection is located on
pins 15 and 16 of JF1. Refer to the table
on the right for pin defi nitions.
HDD LED
The HDD LED connection is located on
pins 13 and 14 of JF1. Attach a cable here
to indicate HDD activity. See the table on
the right for pin defi nitions.
Chapter 5: Advanced Serverboard Setup
ATX Power 24-pin Connector
Pin Defi nitions (JPW1)
Pin# Defi nition
13 +3.3V
14 -12V
15 COM
16 PS_ON
17 COM
18 COM
19 COM
20 Res (NC)
21 +5V
22 +5V
23 +5V
24 COM
8-pin Power Pin
Defi nitions (JPW2, JPW3)
Pins
1 through 4
5 through 8
NMI Button
Pin Defi nitions (JF1)
Pin#
19
20
Power LED
Pin Defi nitions (JF1)
Pin#
15
16
HDD LED
Pin Defi nitions (JF1)
Pin# Defi nition
13 3.3V Standby
14 HD Active
5-13
Pin # Defi nition
1 +3.3V
2 +3.3V
3 COM
4 +5V
5 COM
6 +5V
7 COM
8 PWR_OK
9 5VSB
10 +12V
11 +12V
12 +3.3V
Defi nition
Ground
+12V
Defi nition
Control
Ground
Defi nition
3.3V
PWR LED