Fitting The Outercase - Baxi Solo 2 PF Installation And Servicing Instruction

7.0 Fitting the Outercase – Page 33

7.1 Fitting the Outercase

1. The warning label may be removed unless the boiler is
to be fitted within a cupboard.
2. Taking the ready assembled outercase, the front door
of which has already been removed, proceed as follows:
3. If the appliance is flued to the left or to the right,
remove the relevant infill panel by removing the retaining
clips and fixing screws (Fig. 83).
4. Offer the outer case up to the hooks on the top of the
back plate (Fig. 85).
5. Ensure that the outer case is located over the lower
tabs on the back plate on both sides (Fig. 86).
6. Using the two screws previously removed, secure the
outer case to the combustion box (Fig. 84).
7. Replace the lower front door panel.
8. Instruct the user in the operation of the boiler controls.
Hand over both the Users Operating and Installation
Instructions giving advice on the necessity of regular
servicing.
33