Baxi Solo 2 PF Installation And Servicing Instruction page 17

5.0 Installation – Page 17
5.6 Assembly of Rear Flue
1. Remove the rear air box blanking plate from the back
plate by releasing the three screws (Fig. 27).
2. Remove the blanking cap at the rear of the turret, by
pushing and turning anti-clockwise to release the bayonet
fitting (Fig. 28).
3. Locate the swaged end of the flue duct over the
bayonet fitting on the turret, taking care not to damage
the '0' ring. Lock the flue duct in place by pressing in and
turning clockwise (Fig. 29).
4. Ensure all seams of the air duct sections are
uppermost and that the '0' ring seal is in position against
the sealing flange.
5. Fit the air duct over the flue duct and draw towards the
back plate, ensuring that the flue duct locates into
position in the terminal end of the air duct.
6. Engage the bayonet slots of the air duct over the
location lugs of the back plate opening and press and turn
clockwise to secure the air duct to the back plate (Fig.
30).
7. In order to increase security of the flue, the bayonet
tags may be deformed to secure the flue in position.
17