Web-Based Management; About Web-Based Management; Preparing For Web Management - Lantech IES-2008 User Manual

Web-Based Management

This section introduces the configuration and functions of the Web-Based
management. The following configuration steps are based on the firmware
version 1.06.

About Web-based Management

On CPU board of the switch there is an embedded HTML web site residing in
flash memory, which offers advanced management features and allow users to
manage the switch from anywhere on the network through a standard browser
such as Microsoft Internet Explorer.
The Web-Based Management supports Internet Explorer 5.0. And, it is applied
for Java Applets for reducing network bandwidth consumption, enhance access
speed and present an easy viewing screen.
[NOTE] By default, IE5.0 or later version does not allow Java Applets to open
sockets. The user has to explicitly modify the browser setting to enable Java
Applets to use network ports.

Preparing for Web Management

Before to use web management, install the industrial switch on your network
and make sure that any one of PC on your network can connect with the
industrial switch through the web browser. The industrial switch default value of
IP, subnet mask, username and password is as below:
IP Address: 192.168.16.1
Subnet Mask: 255.255.255.0
19