Planet Networking & Communication SGS-5220 User Manual page 27

PWR1 Green
Green
PWR2
STX1 Green
STX2 Green
 Per 10/100/1000BASE-T interfaces (Port-1 to Port-24)
LED Color
LNK/ACT Green
PoE Orange
 Per 10G uplink SFP+ interface (Port-25 to Port-26)
LED Color
10G
Green
LNK/ACT
1G
Orange
LNK/ACT
SGS-5220-24S2XR LED Indication
Lights to indicate power supply 1 has failed.
Lights to indicate power supply 2 has failed.
Lights to indicate the link through that SFP+ stacking port is successfully established with
speed 10Gbps.
Off to indicate that the port is link down.
Lights to indicate the link through that SFP+ stacking port is successfully established with
speed 10Gbps.
Off to indicate that the port is link down.
Lights to indicate the link through that port is successfully established at
10/100/1000Mbps.
Blinks to indicate that the switch is actively sending or receiving data over that port.
Lights to Indicate the port is providing 56V DC in-line power.
Blinks to indicate the connected device is not a PoE Powered Device (PD).
Lights to indicate the port is running in 10Gbps speed and successfully established.
Blinks to indicate that the switch is actively sending or receiving data over that port.
Lights to indicate the port is running in 1Gbps speed and successfully established.
Blinks to indicate that the switch is actively sending or receiving data over that port.
Figure 2-1-5: Front Panel LEDs of SGS-5220-24S2XR
Figure 2-1-6: Rear Panel LEDs of SGS-5220-24S2XR
User's Manual of SGS-5220 Series
Function
Function
27