Built-in Trivial File Transfer Protocol (TFTP) client
BOOTP and DHCP for IP address assignment
System Maintenance
-
Firmware upload and download via HTTP or TFTP
-
Reset button for system reboot or reset to factory default
-
Dual Images
DHCP Relay
DHCP Option82
User Privilege levels control
NTP (Network Time Protocol)
Link Layer Discovery Protocol (LLDP) and LLDP-MED
Network Diagnostic
-
ICMPv6 and ICMPv4 Remote Ping
-
Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
SMTP/Syslog remote alarm
Four RMON groups (history, statistics, alarms and events)
SNMP trap for interface Link Up and Link Down notification
System Log
PLANET Smart Discovery Utility for deployment management
Power over Ethernet
■ Complies with IEEE 802.3at High Power over Ethernet End-span PSE
■ Complies with IEEE 802.3af Power over Ethernet End-span PSE
■ Up to 24 ports of IEEE 802.3af / 802.3at devices powered
■ Supports PoE Power up to 30.8 watts for each PoE port
■ Auto detects powered device (PD)
■ Circuit protection prevents power interference between ports
■ Remote power feeding up to 100 meters
■ PoE Management
− Total PoE power budget control
− Per port PoE function enable/disable
− PoE Port Power feeding priority
− Per PoE port power limitation
− PD classification detection
− PD alive-check
− PoE schedule
− PD power recycling schedule
Redundant Power
System(SGS-5220-24S2XR only)
Redundant 100~240V AC and 36-60V DC dual power
Active-active redundant power failure protection
Backup of catastrophic power failure on one supply
Fault tolerance and resilience
(SGS-5220-24P2X only)
User's Manual of SGS-5220 Series
19