Planet Networking & Communication SGS-5220 User Manual page 202

• User
•
QCE#
• Port
•
Frame Type
•
Action
•
Conflict
Buttons
: Select the QCL status from this drop down list.
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to release the resources required to add QCL entry, in case the conflict status for any QCL entry
is 'yes'.
: Click to refresh the page.
Indicates the QCL user.
Indicates the index of QCE.
Indicates the list of ports configured with the QCE.
Indicates the type of frame to look for incoming frames. Possible frame types are:
■
Any: The QCE will match all frame type.
■
Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are
allowed.
■
LLC: Only (LLC) frames are allowed.
■
SNAP: Only (SNAP) frames are allowed.
■
IPv4: The QCE will match only IPV4 frames.
■
IPv6: The QCE will match only IPV6 frames.
Indicates the classification action taken on ingress frame if parameters
configured are matched with the frame's content.
There are three action fields: Class, DPL and DSCP.
■
Class: Classified QoS class; if a frame matches the QCE it will be
put in the queue.
■
DPL: Drop Precedence Level; if a frame matches the QCE then DP
level will set to value displayed under DPL column.
■
DSCP: If a frame matches the QCE then DSCP will be classified with
the value displayed under DSCP column.
Displays Conflict status of QCL entries. As H/W resources are shared by multiple
applications. It may happen that resources required to add a QCE may not be
available, in that case it shows conflict status as 'Yes', otherwise it is always 'No'.
Please note that conflict can be resolved by releasing the H/W resources
required to add QCL entry on pressing 'Resolve Conflict' button.
202
User's Manual of SGS-5220 Series