Planet Networking & Communication SGS-5220 User Manual page 122

• Ingress Filtering
• Frame Type
• Port VLAN ID
• Tx Tag
• Untagged VLAN ID
• Conflicts
Buttons
: Select VLAN Users from this drop down list.
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediately.
tags are not removed.
Show the ingress filtering for a port. This parameter affects VLAN ingress
processing. If ingress filtering is enabled and the ingress port is not a member of
the classified VLAN of the frame, the frame is discarded.
Shows whether the port accepts all frames or only tagged frames. This
parameter affects VLAN ingress processing. If the port only accepts tagged
frames, untagged frames received on that port are discarded.
Shows the PVID setting for the port.
Shows egress filtering frame status whether tagged or untagged.
Shows UVID (untagged VLAN ID). Port's UVID determines the packet's behavior
at the egress side.
Shows status of Conflicts whether exists or Not. When a Volatile VLAN User
requests to set VLAN membership or VLAN port configuration, the following
conflicts can occur:

Functional Conflicts between feature.

Conflicts due to hardware limitation.

Direct conflict between user modules.
122
User's Manual of SGS-5220 Series