Planet Networking & Communication SGS-5220 User Manual page 177

The page includes the following fields:
Object
• MVR Mode
• Delete
• MVR VID
• MVR Name
• IGMP Address
Figure 4-8-19: MVR Configuration page Screenshot
Description
Enable/Disable the Global MVR.
The Unregistered Flooding control depends on the current configuration in
IGMP/MLD Snooping.
It is suggested to enable Unregistered Flooding control when the MVR group
table is full.
Check to delete the entry. The designated entry will be deleted during the next
save.
Specify the Multicast VLAN ID.
Be Caution: MVR source ports are not recommended to be overlapped with
management VLAN ports.
MVR Name is an optional attribute to indicate the name of the specific MVR
VLAN. Maximum length of the MVR VLAN Name string is 16. MVR VLAN Name
can only contain alphabets or numbers. When the optional MVR VLAN name is
given, it should contain at least one alphabet. MVR VLAN name can be edited for
the existing MVR VLAN entries or it can be added to the new entries.
Define the IPv4 address as source address used in IP header for IGMP control
177
User's Manual of SGS-5220 Series