Appendix C: System Specifications - Supero SuperWorkstation 7043A-8R User Manual

Supermicro superworkstation 7043a-8r: user guide
Table of Contents

Advertisement

System Specifications
Processors
Single or dual 604-pin Intel
side (system) bus speed of 533/400 MHz
Note: Please refer to the support section of our web site for a complete listing of supported
processors. (http://www.supermicro.com/TechSupport.htm)
Chipset
Intel E7505 chipset
BIOS
®
4 Mb Phoenix
Flash ROM
Memory Capacity
Six 184-pin DDR DIMM sockets supporting up to 12 GB of registered
ECC DDR266 (PC2100) SDRAM
Note: Interleaved memory - requires memory to be installed two at a time. See the memory
section in Chapter 5 for details.
SCSI Controller (7043A-8R)
Adaptec AIC-7902 for Ultra320 onboard SCSI
Peripheral Drives/Bays
One (1) 3.5" floppy drive
Three (3) 5 1/4" drive bays
Seven (7) 3.5 x 1" drive bays (for SCSI/IDE drives)
Expansion Slots
Chassis: Seven (7) I/O chassis slots
Motherboard: total of five (5) PCI-X slots and one (1) 8xAGP slot

Appendix C: System Specifications

Appendix C
®
TM
Xeon
processors to 3.20 GHz at a front
C-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superworkstation 7043a-i

Table of Contents