Advanced Setup - Supero SuperWorkstation 7043A-8R User Manual

S W
UPER ORKSTATION 7043A-8R/7043A-i Manual
7-4

Advanced Setup

Choose Advanced from the Phoenix BIOS Setup Utility main menu with the arrow
keys. You should see the following display. The items with a triangle beside
them have sub menus that can be accessed by highlighting the item and pressing
<Enter>. Options for PIR settings are displayed by highlighting the setting option
using the arrow keys and pressing <Enter>. All Advanced BIOS Setup options
are described in this section.
Main Advanced
Boot Features
PCI/PnP Configuration
Advanced Chipset Control
I/O Device Configuration
Advanced Processor Options
DMI Event Logging
Console Redirection
Hardware Monitor Logic
↑↓
F1 Help
↔
Esc Exit Select Menu
Boot Features
Access the submenu to make changes to the following settings.
Quick Boot Mode
If enabled, this feature will speed up the POST (Power On Self Test) routine
after the computer is turned on. The settings are Enabled and Disabled. If
Disabled, the POST routine will run at normal speed.
Quiet Boot
This setting allows you to Enable or Disable the diagnostic screen during
boot-up.
Phoenix BIOS Setup Utility
Security
Select Item -/+
Enter Select Sub-Menu
Boot
Change Values
7-6
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit