Table of Contents
Advertisement
5-4
I/O Ports
The I/O ports are color coded in conformance with the PC 99 specification.
See Figure 5-4 below for the colors and locations of the various I/O ports.
Figure 5-4. X5DA8/X5DAE Rear Panel I/O Ports
Mouse
(Green)
Keyboard
USB Ports
(Purple)
5-5
Installing Memory
Note: Check the Supermicro web site for recommended memory modules:
http://www.supermicro.com/TECHSUPPORT/FAQs/Memory_vendors.htm
Exercise extreme care when installing or removing DIMM
modules to prevent any possible damage. Also note that the
memory is interleaved to improve performance (see step 1).
DIMM Installation (See Figure 5-5)
1. Insert the desired number of DIMMs into the memory slots, starting with
Bank 1.
modules at a time, beginning with Bank 1, then Bank 2, and so on.
2. Insert each DIMM module vertically into its slot.
notch along the bottom of the module to prevent inserting the DIMM
module incorrectly.
3. Gently press down on the DIMM module until it snaps into place in the
slot. Repeat for all modules (see step 1 above).
Parallel Port (Burgundy)
COM1 Port
(Turquoise)
CAUTION
The memory scheme is interleaved so you must install two
Chapter 5: Advanced Motherboard Setup
COM2 Port
(Turquoise)
5-7
Line Out (Lime)
GLAN
Line In
MIC
(Blue)
(Pink)
Pay attention to the
Advertisement
Table of Contents
