General Safety Precautions - Supero SuperWorkstation 7043A-8R User Manual

S W
UPER ORKSTATION 7043A-8R/7043A-i Manual
The power supply power cord must include a grounding plug and
must be plugged into grounded electrical outlets.
Motherboard Battery: CAUTION - There is a danger of explosion if
the onboard battery is installed backwards, which will reverse its
polarities. The positive side of the battery should be facing up and
the negative side should facing the motherboard. This battery must
be replaced only with the same or an equivalent type recommended
by the manufacturer. Dispose of used batteries according to the
manufacturer's instructions.
CD-ROM Laser: CAUTION - this server may have come equipped
with a CD-ROM drive. To prevent direct exposure to the laser beam
and hazardous radiation exposure, do not open the enclosure or
use the unit in any unconventional way.
4-2

General Safety Precautions

!
Follow these rules to ensure general safety:
Keep the area around the SuperWorkstation 7043A-8R/7043A-i clean
and free of clutter.
The SuperWorkstation 7043A-8R/7043A-i weighs approximately 47/39
lbs. when fully loaded. When lifting the system, two people at
either end should lift slowly with their feet spread out to distribute
the weight. Always keep your back straight and lift with your legs.
Place the chassis top/side cover and any system components that
have been removed away from the system or on a table so that
they won't accidentally be stepped on.
While working on the system, do not wear loose clothing such as
neckties and unbuttoned shirt sleeves, which can come into contact
with electrical circuits or be pulled into a cooling fan.
Remove any jewelry or metal objects from your body, which are
excellent metal conductors that can create short circuits and harm
you if they come into contact with printed circuit boards or areas
4-2