Wake-On-Lan; Wake-On-Ring; Sata I 2 C Header; Smb_Pw Header - Supermicro AW-4020C-T User Manual

Wake-On-LAN

The Wake-On-LAN header is desig-
nated JWOL. See the table on the
right for pin defi nitions. You must
have a LAN card with a Wake-On-LAN
connector and cable to use the Wake-
On-LAN feature.

Wake-On-Ring

The Wake-On-Ring header is desig-
nated JWOR. This function allows
your computer to receive and "wake-
up" by an incoming call to the modem
when in suspend state. See the table
on the right for pin defi nitions. You
must have a Wake-On-Ring card and
cable to use this feature.

SMB_PW Header

The header at SMB_PW is for I
which may be used to monitor the
status of the power supply, fans and
system temperature. See the table on
the right for pin defi nitions.
SATA I 2 C Header
The System Management Bus header
is located at J18. Connect the appro-
priate cable here to utilize SMB on your
system. See the table on the right for
pin defi nitions.

Overheat LED

Connect an LED to the JOH header to
provide warning of chassis overheat-
ing. See the table on the right for pin
defi nitions.
Chapter 5: Advanced Serverboard Setup
Wake-On-LAN
Pin Defi nitions
Pin#
1
2
3
Wake-On-Ring
Pin Defi nitions
Pin#
1
2
Pin Defi nitions
Pin#
2
C,
1
2
3
4
5
Pin Defi nitions (J18)
Pin#
1
2
3
Overheat LED
Pin Defi nitions (JOH)
Pin#
1
2
5-17
(JWOL)
Defi nition
+5V Standby
Ground
Wake-up
(JWOR)
Defi nition
Ground (Black)
Wake-up
SMB_PW
Defi nition
Clock
Data
PWR Fail
Gnd
+3.3V
SATA I 2 C
Defi nition
SMB Data
Ground
Clock
Defi nition
12VDC
OH Active