Supermicro AW-4020C-T User Manual page 73

SATA0 IDE Interface
This setting is used to Enable or Disable the serial controller for SATA0.
SATA1 IDE Interface
This setting is used to Enable or Disable the serial controller for SATA1.
IO4 SATA0 IDE Interface
This setting is used to Enable or Disable the serial controller for IO4 SATA0.
IO4 SATA1 IDE Interface
This setting is used to Enable or Disable the serial controller for IO4 SATA1.
First Boot Device From
Use this setting to select the fi rst boot device as being P-ATA or S-ATA.
Confi guration nVidia RAID ROM
RAID Option ROM
This setting is used to Enable or Disable the nVidia ROM.
Floppy Confi guration
Floppy A
Move the cursor to these fi elds via up and down <arrow> keys to select the fl oppy
type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3½", 1.44
MB 3½", and 2.88 MB 3½".
Floppy B
Move the cursor to these fi elds via up and down <arrow> keys to select the fl oppy
type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3½", 1.44
MB 3½", and 2.88 MB 3½".
Onboard Floppy Controller
Use this setting to Enable or Disable the onboard fl oppy controller.
7-5
Chapter 7: BIOS