Removing the display panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the stand.
2
Remove the
back
3
Remove the
system-board
Procedure
1
Peel off the tape that secures the display cable to the connector on the system
board.
2
Using your fingertips, push the securing clips on the display cable inwards and
disconnect it from the system board.
3
Disconnect the display-backlight cable and touch-screen cable (optional) from
the display panel.
computer. After working inside your computer, follow
After working inside your
cover.
shield.
computer. For more safety best
www.dell.com/
Before
73