Midea MFEP26VA-N User Manual page 52

CAUTION
• Before changing the filter or cleaning, turn o the unit and disconnect its
power supply.
• When removing filter, do not touch metal parts in the unit. The sharp metal
edges can cut you.
• Do not use water to clean the inside of the indoor unit. This can destroy
insulation and cause electrical shock.
• Do not expose filter to direct sunlight when drying. This can shrink the filter.
• Any maintenance and cleaning of outdoor unit should be performed by an
authorized dealer or a licensed service provider.
• Any unit repairs should be performed by an authorized dealer or a licensed
service provider.
Air Filter Reminders (Optional)
Display window: "CL"
Display window: "nF"
Maintenance your AC.
Maintenance –
Long Periods of Non-Use
If you plan not to use your air conditioner for
an extended period of time, do the following:
Clean all filters
Turn o the unit and
disconnect the power
Air Filter Cleaning Reminder
• After 240 hours of use, the display window on the indoor unit will flash "CL."
This is a reminder to clean your filter. After 15 seconds, the unit will revert to
its previous display.
• To reset the reminder, press the LED button on your remote control 4 times,
or press the MANUAL CONTROL button 3 times. If you don't reset the
reminder, the "CL" indicator will flash again when you restart the unit.
Air Filter Replacement Reminder
• After 2,880 hours of use, the display window on the indoor unit will flash "nF."
This is a reminder to replace your filter. After 15 seconds, the unit will revert to
its previous display.
• To reset the reminder, press the LED button on your remote control 4 times,
or press the MANUAL CONTROL button 3 times. If you don't reset the
reminder, the "nF" indicator will flash again when you restart the unit.
Turn on FAN function until
unit dries out completely
Remove batteries
from remote control
Maintenance –
Pre-Season Inspection
After long periods of non-use, or before periods of
frequent use, do the following:
Check for damaged wires
Make sure nothing is blocking
all air inlets and outlets
50
Clean all filters Check for leaks
Replace batteries