Table of Contents
Advertisement
ECO/GEAR function
Press this button to enter the energy e cient mode in a sequence of
following:
ECO
Note:This function is only available under COOL mode.
ECO operation:
Under cooling mode, press this button, the remote
controller will adjust the temperature automatically
O
to 24 C/75 F, fan speed of Auto to save energy
O
(only when the set temperature is less than
O
24 C/75 F). If the set temperature is above
O
O
24 C/75 F, press the ECO button, the fan speed
O
will change to Auto, the set temperature will
remain unchanged.
GEAR operation:
Press the ECO/GEAR button to enter the GEAR operation as following:
75%(up to 75% electrial energy consumption)
Previous setting mode.
Under GEAR operation, the setting temperature will revert back in the display screen after 3 seconds you
select the desired electrical energy consumption operation
Silence function
2s
Keep pressing Fan button for more than 2 seconds to activate/disable Silence function.
Due to low frequency operation of compressor, it may result in insu cient cooling and
heating capacity. Press ON/OFF, Mode, Sleep, Boost or Clean button while operating will
cancel silence function.
FP function
Press this button 2 times during one second under HEAT Mode and setting temperature of 16 C/60 F
to activate the FP function.
2
The unit will operate at high fan speed (while compressor on) with temperature
automatically set to 8 C/46 F.
GEAR(75%)
GEAR(50%)
O
O
Previous setting mode
NOTE: Pressing the ECO button, or modifying
the mode or adjusting the set temperature to
less than 24 C/75 F will stop ECO operation.
Under ECO operation, the set tmeperature
should be 24 C/75 F or above, it may result in
insu cient cooling. If you feel uncomfortable,
just press the ECO button again to stop it.
50%(up to 50% electrial energy consumption)
47
ECO......
O
O
O
O
O
O
Advertisement
Table of Contents
