Midea MFEP26VA-N User Manual page 38

To further optimize the performance of your unit, do the following:
Keep doors and windows closed.
●
Limit energy usage by using TIMER ON and TIMER OFF functions.
●
Do not block air inlets or outlets.
●
Regularly inspect and clean air filters.
●
More features
NOTE
Not all the functions are available for the air conditioner you purchased, please check the indoor display
and remote control of your unit.
Auto-Restart
●
If the unit loses power, it will automatically
restart with the prior settings once power has
been restored.
Anti-mildew
●
When turning o the unit from COOL, AUTO
(COOL), or DRY modes, the air conditioner will
continue operate at very low power to dry up
condensed water and prevent mildew growth.
Wireless Control (Model dependent)
●
Wireless control allows you to control your air
conditioner using your mobile phone and a
wireless connection.
For the USB device access, replacement,
maintenance operations must be carried
out by professional sta .
• Active Clean function(some units)
-- The Active Clean Technology washes away
dust when it adheres to the heat exchanger by
automatically freezing and then rapidly thawing
the frost. A "pi-pi" sound will be heard.
The Active clean operation is used to produce
more condensed water to improve the cleaning
e ect, and the cold air will blow out. After
cleaning, the internal wind wheel then keeps
operating with hot air to blow-dry the
evaporator, thus keeping the inside clean.
-- When this function is turned on, the indoor
unit display window appears "CL " , after 20
to 45 minutes, the unit will turn o automatically
and cancel Active Clean function.
ECO Intelligent eye(some units)
●
The system is controlled intelligently under
Intelligent eye mode. It can detect the
people's activities in the room. In cooling
mode, when you are away for 30 minutes, the
unit will automatically lower the frequency to
save energy(for Inverter models only). And the
unit will automatically start and resume
operation if sensing human activity again.
Refrigerant Leakage Detection(some units)
●
The indoor unit will automatically display
"EL0C" when it detects refrigerant leakage.
Louver Angle Memory
●
When turning on your unit, the louver will
automatically resume its former angle.
Breeze Away (some units)
●
This feature avoids direct air flow blowing on
the body and make you feel indulging in
silky coolness.
Sleep Operation
●
The SLEEP function is used to decrease
energy use while you sleep (and don't
need the same temperature settings to
stay comfortable).
Press the SLEEP button on remote control
when in COOL mode, the unit will increase
the temperature by 1°C (2°F) after 1 hour,
and will increase an additional 1°C (2°F) after
another hour.
When in HEAT mode, the unit will decrease
the temperature by 1°C (2°F) after 1 hour,
and will decrease an additional 1°C (2°F)
after another hour.
The sleep feature will stop after 8 hours and
the system will keep running with final
situation.
Cool mode(+1 C/2 F) per hour for the first two hours
Set
temperature
Heat mode( -1 C/2 F) per hour for the first two hours
Saving energy during sleep
36
SLEEP Operation
1hr 1hr
Keep
running