Table of Contents
Advertisement
Buttons and Functions
1
4
5
8
9
12
Boost
Model:
RG10A2(B2S)/BGEFU1.
RG10A10(B2S)/BGEF(20-28°C/68-82°F).
RG10A(B2S)/BGEF & RG10A(B2S)/BGEFU1
( Fresh feature is not available)
RG10A2(B2S)/BGCEFU1 & RG10A2(B2S)/
BGCEF(Cooling only models, AUTO mode
and HEAT mode are not available)
Description
ON/OFF
No.1
Turn the unit on or o .
MODE
No.2
Auto > Cool > Dry > Heat > Fan
NOTE: HEAT mode is not supported by the cooling only
appliance.
ECO/GEAR
No.3
ECO > GEAR(75%) > GEAR(50%) > Previous setting mode
2
> ECO
3
TEMP.
Increases temperature in 1°C (1°F) increments. Max. tem-
No.4
perature is 30°C (86°F).
6
(Press together
7
will alternate the temperature display between the °C & °F).
SET
No.5
Air magic/UV lamp > Sleep > Follow Me > AP mode >
10
Air magic/UV lamp
11
[*]: Model dependent
13
OK
14
No.6
Used to confirm the selected functions
TIMER
No.7
Set timer to turn unit on or o
TEMP.
No.8
Decreases temperature in 1°C (1°F) increments. Min. tem-
perature is 16°C (60°F)
FAN SPEED
AU > 20% >40% > 60% > 80% > 100%
No.9
Press the TEMP
speed in 1% increments.
SWING
Starts and stops the horizontal louver movement. Hold
No.10
down for 2 seconds to initiate vertical louver auto swing
feature(some units).
BREEZE AWAY
Avoids direct air flow blowing on the body
No.11
(This feature is available under cool, Fan and Dry mode only)
BOOST
No.12
Boost
Reach desired temperature in shortest possible time.
LED
LED
No.13
Turns LED display & air conditioner buzzer on and o
CLEAN
Clean
No.14
Used to start/stop the Self Clean or Active Clean function.
Boost
No.15
LOCK
Press together these two buttons simultaneously for 5 seconds
to lock the keyboard. Press together these two buttons for 2
seconds to unlock the keyboard.
&
buttons at the same time for 3 seconds
*
*
or
button to increase/ decrease the fan
Clean
41
*
Advertisement
Table of Contents
