Table of Contents
Advertisement
Enter Setup
1. Read the "Enter Setup" barcode.
2. Read the "Consecutive Scanning Mode" barcode.
3. Read the "Consecutive Scanning Interval Setting" barcode.
4. Read the "1s" barcode.
5. Read the "Exit and Save" barcode.
Consecutive Scanning Mode
Consecutive Scanning Interval Setting
400ms
800ms
1s
(*) 2s
3s
5s
10s
15s
Manual Scanning Mode
When under the manual scanning mode, a red-light beam will appear when you
press the scan button which indicates the scanner is ready to scan barcodes. The
red light will not go off until one of the situations below occurs.
10
Exit and Save
Advertisement
Table of Contents
