Scanning Mode; Status Indication - Inateck BS01001 User Manual

11. Scanning Mode

Manual Scanning Mode（default setting）
Auto-induction Mode
Note: "Scanning Mode" cannot be adjusted by using the setting of "Restore to Factory
Mode". It should be set by scanning the configuration barcodes above.

12. Status indication

Buzzer Indication
Beeping
Three long beeps
Long beep for 0.4s（low）
Short beep once
Indicator light on the barcode scanner
Indicator color
LED lit blue
LED lit red
Flashes green and blue
Flashes green intermittently
10
Meaning
Low battery, requires charging
Bluetooth connection unsuccessful
Successful upload
Enter settings
Successful Bluetooth reconnection
Meaning
Successful Bluetooth connection
Charging, lights out upon full battery
Bluetooth waiting for pairing
Dongle is waiting for pairing
Constant Bright Mode