strange "beep" sound when it reads a duplicate barcode, and the duplicate barcode scanned
will not be stored in the buffer. The scanner defaults "Disable Duplicate Scan Check". You
may enable "duplicate scan check" as per your needs.
Enable Duplicate Scan Check
Volume Control
Silent
(*) Medium Volume
Vibration Alert
Disable Vibration Alert
Scanning Mode
Auto Red Light Shut off Mode
Auto red light shut off mode is the default mode. When under this mode, the red light will
Enter Setup
(*) Disable Duplicate Scan Check
(*) Enable Slight Vibration Alert
Enable Strong Vibration Alert
Exit and Save
Low Volume
High Volume
13