3
Enter the time in [RX Timeout].
Enter the time in minutes from the start of reception standby, after print data reception is canceled, to
the timeout.
When Configuring WSD
1
Click [WSD Settings]
➠
The [Edit WSD Settings] screen is displayed.
2
Set whether to use WSD for each function.
When not using WSD, clear the checkbox of the function for restricting use of WSD.
Using WSD to Print Data
Select the [Use WSD Printing] checkbox.
The [Use WSD Browsing] checkbox is selected automatically, and WSD is used to obtain the information
of the machine from the computer.
When Responding to a Search Request of the Machine by Multicast Discovery
Select the [Use Multicast Discovery] checkbox.
To keep the machine in sleep mode without responding to received multicast discovery packets, clear the
checkbox.
5
Click [OK].
6
Restart the machine.
➠
The settings are applied.
Adding a WSD Network Device
●
Click [
] (Start)
[
perform the operations following the instructions on the screen.
●
For details about installing the driver via a WSD network, see the manual of the driver at the online manual
site.
https://oip.manual.canon/
Changing the Port Number
●
To change the port number of each protocol, see the following:
Changing the Port Number(P. 150)
Security
[Edit].
Restarting the Machine(P. 75)
] (Settings)
[Devices]
[Printers & scanners]
[Add printers & scanners], and
173