Table of Contents
Advertisement
When the Settings Menu Is Initialized
When any of the following is initialized, restart the machine to apply the initialized settings.
Machine(P. 75)
●
[Preferences]
●
[Function Settings]
●
[Management Settings]
●
[Network Settings]
When Initializing a Key and Certificate
●
Functions using a key and certificate such as TLS are disabled. To use these functions again, you must set the
key and certificate, and then enable the function.
When [Management Settings] of the Settings Menu Is Initialized
●
This also initializes the Remote UI Access PIN. To use Remote UI, you must set the Remote UI Access PIN
again.
Setting the PIN to Use for Remote UI(P. 168)
Initializing All Settings and Data
Use the operation panel to initialize all settings and data. You cannot initialize these using Remote UI from a computer.
Administrator privileges are required. When these are initialized, the machine restarts automatically.
●
Before initialization, check that there is no data being processed or waiting to be processed. This data is
deleted when the initialization is performed.
1
On the operation panel, select [Menu] in the [Home] screen, and press
Screen(P. 81)
2
Press [Management Settings]
➠
The initialization confirmation screen is displayed.
If the login screen appears, enter the System Manager ID and PIN, and then press
ID and PIN(P. 4)
3
Press
[Yes]
➠
All settings and data are initialized.
When initialization is complete, the machine restarts automatically.
Managing the Machine
[Initialize All Data/Settings]
.
193
Restarting the
.
[Home]
.
.
System Manager
Advertisement
Table of Contents
