Operation - HADEF 46/21E Installation, Operating And Maintenance Instruction

Emergency release – Hoist (as option)
In order to be able to drain the load in
the event of a power supply failure, it is
possible to release the brake manually
by means of lever (A).
DANGER!
The emergency drain may only be used in the event of a power supply failure and not in the event of a
technical fault on the unit!
NOTE!
A minimum weight of approx. 20% of the rated load is necessary for lowering. This value depends on
application and ambient conditions!
Disengaging clutch (optionally)
1 Ratchet lever
2 Clutch lever
Disengage the clutch
Illustration 20
 Pull the clutch lever (2) until the ratchet lever
(1) locks.
The clutch is now disengaged the the drum has
free rotation - without contact to the gear.
DANGER!
The following is not allowed:
 Disengaging under load.
 Manipulation of the disengaging device.
8

Operation

The following, important points must be observed when operating the equipment:
 Read the safety instructions.
 Never load the devices beyond their working load limit.
 When changing the motor turning direction, allow the motor to come to a standstill first.
 The prescribed maintenance intervals must be adhered to.
16
Elektric
Illustration 19
Illustration 21
 Lift the ratchet lever (1).
 The clutch lever (2) moves by spring tension in
direction "home position".
 Move the drum slowly by hand until the clutch
locks completely and can transmit the force.
When the clutch is engaged again, the winch can
be put into operation again.
Elektric-EX Pneumatic + EX
A
Engage the clutch
5.52.262.00.01.13