Elite ProAV WhiteBoardScreen TE Series User Manual

WhiteBoardScreen TE Series
Matte White Dry-Erase Whiteboard
Projector Screen
Model# WB4x8W2
User's Guide
Thank you for choosing the WhiteBoardScreen TE (Thin Edge) Series dry-erase whiteboard projection screen!
The VersaWhite model can be used with tabletop or ceiling mounted standard, short, and ultra-short throw
projectors in a light controlled environment.
In addition to being a projector screen, it double as a dry-erase whiteboard that is scratch-resistant and easy to
clean. Please read through this user guide before utilizing the screen. Correct usage and maintenance will ensure a
long product life.
Precautionary Notes:
Before using the dry-erase function of your whiteboard screen, please make note of the following instructions to
properly maintain and clean your dry-erase surface projection screen. These Whiteboard cleaning tips are just
as relevant with any dry-erase writing surface as they are with our Whiteboard- Projection Screens.
1. Only use a high-density foam eraser when removing dry-erase markings from the WhiteBoardScreen.
2. Do not use abrasive erasers as these may scratch the surface of the screen and will not erase dry-erase pen
markings on the whiteboard screen surface.
3. Never spray the whiteboard cleaning solution onto the surface while marker writing is present and then attempt
to use a high density foam eraser to remove. This will only smear the dry-erase marker ink making the surface
more difficult to clean and will likely ruin the foam eraser.
4. If there are any dry-erase markings left behind even after attempting to remove them using our high density
erasers, spray our whiteboard cleaning solution directly onto the screen surface and use only a soft microfiber cloth
to wipe-down and clean the area.
U-00183
06242020 www.eliteproav.com 1