Pre-Operation Inspection And Service - Schulte GX-130 Operator's Manual

Table of Contents

8. PRE-OPERATION INSPECTION AND SERVICE

Before each use, a pre-operation inspection and service of the implement and tractor must be performed. This

includes routine maintenance and scheduled lubrication, inspecting that all safety devices are equipped and

functional, and performing needed repairs. DO NOT operate the unit if the pre-operation inspection reveals

any condition affecting safe operation. Perform repairs and replacement of damaged and missing parts as

soon as noticed. By performing a thorough pre-operation inspection and service, valuable down time and

repair cost can be avoided. OPS-U-0029str

Always disconnect the main PTO Driveline from the Tractor before performing service on the

Implement.

running. Rotating Parts, Blades or Drivelines could turn without warning and cause

immediate entanglement, injury or death.

DO NOT allow any person under a folded wing unless wing is securely

locked up or supported. DO NOT approach the Implement unless the

Tractor is turned off and all motion has ceased. Never work under the

frame work, or any lifted component unless the implement is securely

supported or blocked up. A sudden or inadvertent fall by any of these

components could cause serious injury or even death.

Periodically inspect all moving parts for wear and replace when necessary

with authorized service parts. Look for loose fasteners, worn or broken

parts, and leaky or loose fittings. Make sure all pins have cotter pins and

washers. Serious injury may occur from not maintaining this machine in

good working order.

GX-130 04/23

OPERATION

Never work on the Implement with the tractor PTO driveline connected and

(SG-21 )str

Operation Section 4-17

(S3PT-11)str

(STI-03) str

Table of Contents