Table of Contents
Advertisement
Procedure for refilling splitter gearboxes:
1. To open the main shield remove the lynch pin.
2. Park unit on a level surface
3. Remove drain plug and drain out oil
4. Reinstall drain plug
5. Remove vent plug/dipstick.
6. Fill gearbox until oil level reaches the fill line
on dipstick. Capacity is approximately 2.7
liters (2.85 qt). Do not screw dipstick when
checking oil level.
7. Reinstall vent plug and level plug.
8. Dispose of old oil in accordance with the local
regulations
9. Firmly close the main shield and reinstall the
lynch pin.
GX-130 04/23
© 2023 Alamo Group Inc.
MAINTENANCE
Maintenance Section 5-9
Advertisement
Table of Contents
