Pro Level; Tractor Shaft - Schulte GX-130 Operator's Manual

ASSEMBLY
IMPORTANT: Scan this QR Code with your smart phone to link to the ADMA Driveline
Safety Manual for more information on the safe use of a driveline during normal
operation and maintenance. Or type in your internet browser the following web
address: www.algqr.com/dme
Ops-0009-MISC str

PRO LEVEL

The pro level clevis is designed to fit CAT II and
CAT III drawbars.
The clevis comes with two factory installed CAT II
conversion adapters, shown in grey to the right.
To convert to CAT III remove the 1/2" x 1" UNC
bolts, top and bottom, then remove adapters.
NOTE: Connect clevis to drawbar in orientation as
shown to the right and as indicated by decals on
clevis. Connecting in any other orientation will
result in serious damage to the Clevis, hitch and/
or drawbar.

TRACTOR SHAFT

After the wings are lowered to the ground, remove
the tractor shaft from shipping brackets on the
wing. Longer Bolts have been used to mount to
mount the shipping bracket on the machine then
Shipping Brackets
needed for the chain guard. Remove these bolts
from the machine and replace them with the
carriage bolts provided in the manual container.
Attach the tractor shaft to the divider gearbox. See
Driveline Attachment in the Operation Section.
Remove the tractor shaft shipping brackets from
the machine.
GX-130 04/23 Assembly Section 3-5
© 2023 Alamo Group Inc.