Transport Light Kit - Schulte GX-130 Operator's Manual

TRANSPORT LIGHT KIT

Use FLASHING WARNING LIGHTS when traveling on public roads day or night, unless pro-
hibited by law.
If the rotary cutter obscures the tractor warning or tail lights, the rotary cutter MUST be equipped with a
transport light kit.
Check local highway regulations concerning moving machinery on highways.
Installation of Lights
Lock the rotary cutter into transport position. Bolt
the light frames to the center beam using the
supplied 3/8" bolts, washers and locknuts.
Install the lamps onto the light frames with the
amber light to the outside of the cutter. The red
lamp is to be installed with the red facing the rear.
Install the light module on the right light frame.
GX-130 04/23
© 2023 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-6