Dehumidifying Operation; Adjusting Air Flow Direction; Timer Operation - Vivax ACP-12CH35AEHI+ R32 User Manual

ENG

Timer operation

Press the TIMER ON button can set the auto-on time of the unit. Press the
TIMER OFF button can set the auto-off time of the unit.
To set the Timer-ON:
1. Press the TIMER ON button.
2. Press Temp. up or down button for multiple times to set the desired time
to turn on the unit.
NOTE: If you want to set 2.5 h timer, you will press 5 times to set it (5 x
0,5 h).
3. Point remote to unit and wait 1sec, the TIMER ON will be activated.
To set the Timer-OFF:
1. Press TIMER button to initiate the OFF time sequence.
2. Press Temp. up or down button for multiple times to set the desired time
to turn off the unit.
NOTE: If you want to set timer off in 5 hours, you will press 10 times to set
it (10 x 0,5 h).

Dehumidifying operation

1. Press the MODE button to select DRY
mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature
can be set within a range of 17°C~30°C
in 1°C increments.
3. Press the ON/OFF button to start the air
conditioner.
NOTE
In the Dehumidifying mode, you can not
switch the fan speed. It has already been
automatically controlled.
Adjusting air flow direction (option)
1. When push the SWING UP/DOWN
button, the horizontal louver changes 6
degree in angle for each push. If pushing
more than 2 seconds, the louver will
automatically swing up and down.
33
-
VIVAX