Timer Operation; To Set The Auto-On Time; To Set The Auto-Off Time - Vivax ACP-09CH25AEMI User Manual

VIVAX

Timer operation

To set the Auto-off time.

1. Press the TIMER OFF button. The remote controller shows TIMER OFF, the last Auto-off
setting time and the signal "H" will be shown on the LCD display area. Now it is ready to
reset the Auto-off time to stop the operation.
2. Push the TIMER OFF button again to set desired Auto-off time. Each time you press the
button, the time increases by half an hour between 0 and 10 hours and by one hour
between 10 and 24 hours.
3. After setting the TIMER OFF, there will be a one second delay before the remote
controller transmits the signal to the air conditioner. Then, after approximately another 2
seconds, the signal "H " will disappear and the set temperature will re-appear on the LCD
display window.
Press the TIMER ON button can set the auto-on time
of the unit. Press the TIMER OFF button can set the
auto-off time of the unit.

To set the Auto-on time.

1. Press the TIMER ON button. The remote
controller shows TIMER ON, the last Auto-on
setting time and the signal "H" will be shown on
the LCD display area. Now it is ready to reset the
Auto-on time to START the operation.
2. Push the TIMER ON button again to set desired
Auto-on time. Each time you press the button,
the time increases by half an hour between 0 and
10 hours and by one hour between 10 and 24
hours.
3. After setting the TIMER ON, there will be a one
second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
signal "h" will disappear and the set temperature
will re-appear on the LCD display window.
ENG