Special Setting Mode - Horiba Scientific LAQUAtwin B-771 Instruction Manual

7

Special Setting Mode

The special setting mode enables the meter setting and special operations.
To enter the special setting mode, press and hold the MEAS switch for over
3 seconds in the measurement mode. All the LCD items appear, then the
meter enters the special setting mode.
Tip
To exit the special setting mode with no setting change, press the ON/
OFF switch to turn OFF and ON again.
Automatically
CAL switch*
CAL switch*
CAL switch*
CAL switch*
CAL switch*
Returns to the display for measurement unit setting.
All items
appear.
* Pressing the CAL switch continuously
switches the display in turn.
MEAS
switch "7.1 Measurement unit setting" (page 16)
Used to select measurement unit.
MEAS
"7.2 Temperature display mode" (page 17)
switch
Displays the ambient temperature measured using an
internal temperature sensor.
MEAS
switch
"7.3 Calibration point setting" (page 18)
Used to select the calibration points.
MEAS
"7.4 Initialization mode" (page 19)
switch
All settings and calibration data are reset to the
factory default values.
"7.5 Software version display mode" (page 19)
The current software version is displayed.
15