No.
Name
9
MEAS icon
10 CAL icon
11 Battery alarm icon
Temperature alarm
12
icon
13 Stability icon
Measured value
14
display
Measurement unit
15
display
Blinks until the measured value is stabilized, and lights
steadily when the measured value is settled, while the
reading locking function is active.
Blinks during calibration, and lights steadily when calibration
is finished.
Lights up when the batteries are low and need to be
changed.
Blinks when the measuring environment temperature does
not meet the specified operating temperature (5C to 40C).
Lights up when the measured value is stabilized.
Displays a measured, set, or status value.
A unit symbol lights up corresponding to the value displayed
on the measured value display (14). For conductivity, "S/cm"
or "S/m" is selectable (refer to page 16). "%" lights up for
converted salt concentrations, and "ppm" lights up for con-
verted TDS. The default setting is "S/cm".
3
Description