Adjusting The White Balance - JAI GO-5100M-PGE-1 User Manual

GO-5100MC-PGE-1 | GO-5101MC-PGE-1 | User Manual (Ver. 1.0)

Adjusting the White Balance

Adjust the white balance using R and B gain. The white balance can also be adjusted automatically.
Note: The White Balance function is supported only on the color models.
Manual White Balance Adjustment
1. Expand Analog Control, and set Balance White Auto to Off. (Off is the default setting.)
2. Select the gain to configure in Gain Selector, and set the gain value in Gain.
Automatic White Balance Adjustment
1. Place a white sheet of paper or similar object under the same lighting conditions as the intended
subject, and zoom in to capture the white.
White objects near the subject, such as a white cloth or wall, can also be used.
2. Select the Balance White Auto tab, and click Continuous or Once depending on your intended
application.
The white balance is automatically adjusted.
- 36 -
Preparation